How neutral coloured backgrounds affect the attractiveness and expensiveness of fresh produce

The colour of the background on which products are presented may affect their perceived attractiveness. In order to find out on which type of background various fresh food products look most attractive, we presented five different vegetables (tomato, carrot, yellow bell pepper, eggplant, mushroom) on five different backgrounds with neutral grey colours varying in degree of blackness: 5, 30, 50, 65, and 90%. Forty-six participants provided colour matches for the vegetables and evaluated them on 10 attributes.Overall, the blackness of the backgrounds had little or no effect on the perceived colour of the vegetable. Only for carrots we found a small but significant difference, mainly between the 5% and 90% blackness backgrounds. On the darkest background, the carrot would be perceived as a bit lighter, more saturated, and more yellow rather than red, compared to the lightest background.Differences in perceived attractiveness on the grey backgrounds varied between 0.3 and 1.0 units on a 9-point scale. Attractiveness and expensiveness ratings for most vegetables were highest on the 90% blackness background. In comparison to our previous study where we presented vegetables on hued backgrounds, differences between mean attractiveness ratings were smaller. Because mean attractiveness ratings in the current study were higher, we expect that grey backgrounds are more likely to present vegetable assortments with a variety of hues in an attractive way than hued backgrounds.     

Piezoelectricity of the Transmembrane Protein ba3 Cytochrome c Oxidase

Controlling the electromechanical response of piezoelectric biological structures including tissues, peptides, and amino acids provides new applications for biocompatible, sustainable materials in electronics and medicine. Here, the piezoelectric effect is revealed in another class of biological materials, with robust longitudinal and shear piezoelectricity measured in single crystals of the transmembrane protein ba₃ cytochrome c oxidase from Thermus thermophilus. The experimental findings from piezoresponse force microscopy are substantiated using a range of control measurements and molecular models. The observed longitudinal and shear piezoelectric responses of ≈ 2 and 8 pm V⁻¹, respectively, are comparable to or exceed the performance of commonly used inorganic piezoelectric materials including quartz, aluminum nitride, and zinc oxide. This suggests that transmembrane proteins may provide, in addition to physiological energy transduction, technologically useful piezoelectric material derived entirely from nature. Membrane proteins could extend the range of rationally designed biopiezoelectric materials far beyond the minimalistic peptide motifs currently used in miniaturized energy harvesters, and the finding of robust piezoelectric response in a transmembrane protein also raises fundamental questions regarding the molecular evolution, activation, and role of regulatory proteins in the cellular nanomachinery, indicating that piezoelectricity might be important for fundamental physiological processes.     

Sintering of WC-Ni nanocomposite powder: Experimental and artificial neural networks modeling study

The sintering behavior of WC-Ni nanocomposite powder was evaluated through experimental and statistical approaches to study the contribution of involving parameters of chemical composition (Ni wt. %) and sintering temperature on sinterability of system by assessing the resulted densification and microhardness. The experimental process was designed based on factorial experimental design for independent effective parameters of Ni percentage (12, 18 and 23 wt %), and sintering temperature (8 different values within 1350–1485 °C). The resulted products of experimental testing after compaction and sintering were analyzed by FESEM and EDX to image the microstructure and evaluate the chemical composition and elemental distribution. The density and microhardness were measured as well. An artificial neural network (ANN) was applied to describe the corresponding individual and mutual impacts on sintering. The ANN model was developed by feed-forward back propagation network including topology 2:5:2 and trainlm algorithm to model and predict density and microhardness. A great agreement was observed between the predicted values by the ANN model and the experimental data for density and microhardness (regression coefficients (R²) of 0.9983 and 0.9924 for target functions of relative density and microhardness, respectively). Results showed that the relative importance of operating parameters on target functions (relative density and microhardness) was found to be 62% and 38% for sintering temperature and Ni percentage, respectively. Also, ANN model exhibited relatively high predictive ability and accuracy in describing nonlinear behavior of the sintering of WC-Ni nanocomposite powder. The experimental results confirmed that the appropriate sintering temperature was influenced by Ni content. The optimum parameters were found to be 12 wt % Ni sintered at 1460 °C with the highest microhardness and relative density.     

莫高窟第61窟《回鹘女供养人》文创设计研究

目的针对社会文创设计出现的两种典型误区,以敦煌莫高窟第61窟女供养人文创设计为例进行设计研究实践,梳理出传统视觉形象的研究方法和创新设计方法,以此传承和保护中国传统文化。方法采用“图解法”对莫高窟第61窟东壁南侧女供养人的人物身份、妆容、发饰、服饰、色彩、局部等进行深入剖析,并将其作为文创衍生设计的根本来源,总结适用于当今社会的传统文化视觉元素创新设计方法,实现以传统文化为本源、艺术设计为手段、文创设计为载体的传统文化现代设计转译。结论依据“图解法”完成文创衍生设计,实现传统文化与现代设计的深度融合,有助于为不同传统文化题材的文创设计提供借鉴之意。     

Heat capacities and standard entropies and enthalpies of some compounds essential for steelmaking and refractory design approximated by Debye-Einstein integrals

Heat capacity data for compounds located in the binary CaO–SiO₂, CaO–Al₂O₃ and MgO–Al₂O₃ systems are fitted by Debye-Einstein integrals. Starting from the fitted heat capacities, the standard values of the thermodynamic functions of these compounds are calculated. In almost all cases investigated, the derived standard entropies are within the uncertainties of the values provided in literature. The Debye-Einstein coefficients obtained in this thermodynamic assessment can be used to approximate the heat capacities, enthalpies and entropies of these compounds in the temperature range from 0 to 298.15 K.     

Sustainable optimization of waste management network over extended planning time horizon

This study proposes a multiperiod mixed integer linear programming model for the management of a single municipal solid waste (MSW) treatment plant with sustainability as the objective. Discrete and continuous variables define the capacity selections for diverse MSW technologies, and the operation of the MSW network, respectively. The economic target is considered to maximize the net present value. The environmental impact is the minimization of a normalized environmental objective function (NEOF). The social target is the maximization of jobs. An interesting feature about the research work is the requirement of biodrying technologies for MSW moisture content control. Due to the conflicted nature among the sustainability components, a multiobjective optimization (MO) is carried out to find the Pareto optimal solutions. The MO results show that the Pareto optimal solutions vary around profit range of $4.9–8.5 billion, NEOF impact range of 3.2–3.6 units, and social benefit range of 2700–4828 jobs.     

Optimisation of the spark plasma sintering process for high volume fraction SiCp/Al composites by orthogonal experimental design

Based on orthogonal experimental design (OED), the effects of the sintering pressure, sintering temperature and holding time on the mechanical properties of 50 vol% silicon carbide particle (SiCp)/2024Al composites prepared by spark plasma sintering (SPS) were investigated. The sintering pressure had the greatest effect on the density and bending strength of the material among these three factors, followed by sintering temperature and holding time. The optimised process conditions for producing the 50 vol% SiCp/2024Al were sintering at 550 °C for 5 min under 40 MPa, which resulted in a composite material with a density of 99.7% and good interface bonding with a comparatively high bending strength of 766.65 MPa. This work provides a promising method to produce high volume fraction composites that can meet high strength requirements.     

Flow conditioning system for tri-sonic high pressure aerothermal testing

Blowdown testing offers a cost-effective experimental tool to replicate the aerothermal conditions in numerous high speed systems. The wind tunnel must replicate the inlet operating conditions, while the spatial and time dependent inlet flow conditions should be assessed carefully. This paper provides a design methodology and rules that ensure adequate flow conditioning in high inlet pressure wind tunnels suitable for subsonic and supersonic operation with mass-flow limits ranging from 1 kg/s to 25 kg/s, Reynolds numbers from 10³ (1/m) to 4x10⁷ (1/m), and Mach numbers from 0.01 up to 6. The quality of the proposed flow conditioning system was evaluated using stereo PIV measurements combined with hotwire, Pitot probe, and total flow temperature traverses.     

基于区间犹豫模糊语言集的水资源多目标决策

以鄂北水资源配置工程为对象,研究大型调水工程背景下的多水源多目标优化配置。将鄂北地区水库分为充蓄水库、补偿水库与在线水库等3类,根据各类水库特点对鄂北水资源配置工程进行系统概化,建立以年缺水量最小和调水成本最低为目标函数的多水源多目标优化配置模型。采用权重系数法进行求解得到非劣解集。最后采用基于区间犹豫模糊语言与TOPSIS的多目标决策方法对各方案的缺水量与调水量作出评价并遴选出最优方案。研究结果表明:对鄂北水资源配置工程而言,缺水量与调水量的权重比为7∶3的方案综合评价最优,重视缺水的同时兼顾调水成本;基于区间犹豫模糊语言集与TOPSIS的水资源多目标决策方法经本文实例验证具有较高的稳定性与可行性。     

基于秩序与非秩序理论的文创产品卡通形象设计研究

目的 从秩序与非秩序理论出发,研究文创产品卡通形象的设计方法.方法 对秩序与非秩序理论的视觉机制和创制理论进行梳理,结合实例,阐述了其与文创产品卡通形象设计之间的联系,分析文创产品卡通形象中的秩序与非秩序的表现形式,提出基于秩序与非秩序理论文创产品卡通形象设计的主要原则,归纳出一套基于秩序与非秩序理论的文创产品卡通形象设计流程与方法,指导设计实践,并验证这些理论方法在设计实践中有效性与可行性.结论 通过对秩序与非秩序理论的研究,文创产品卡通形象设计时应注意提高辨识度、亲和力和便于衍生设计的原则.探索基于秩序与非秩序理论的设计流程与方法,按照界定主题、主体形象设计、主体形象拓展、衍生品应用四个环节开展整体方案设计,为文创产品卡通形象设计提供新的思路与方法.